Blow Guns  & Spray Guns, by

Hatzco Industries

Now in our 75th year!

 

| Main | About Hatzco | Blow / Spray Guns | FlexShaft / Scribers | Contact Us |

 


 

Hatzco OEM's and sells worldwide a complete line of Blow Guns & Spray Guns (formerly Claflin®):

 


 

Bang-Pruf® Air Blow Guns

 

These air blow guns exceed OSHA standards and deliver full line pressure to the tip

 

(Model BP Shown with optional accessories)

  • Forged steel body, virtually indestructible
  • The last blow gun you'll ever need
  • Lifetime metal-to-metal seat
  • No springs, no discs
  • Protected button
  • Simple construction requires no servicing or maintenance
  • Available with a wide variety of tips and extensions
  • All models available with optional 1/4" or 3/8" NPT inlets, button or lever operated, with or without hanging hook
  • We'll be glad to mail or FAX a spec sheet

 

Model BPR

  • Basic model, all other models have same simple valve construction
  • This model has a restrictive valve stem with a larger diameter to restrict air flow
  • Plug is sealed with heavy grade Loctite, making removal difficult
  • If more air flow is required, contact us about our "Venturi" Model(not shown)

Model BP

  • Same as above (Model BPR), but without restrictive port
  • Delivers full line pressure to tip

Models BPS and BPRS (Click here to see a picture)

  • Male IPT thread on discharge end for connection to special extension
  • 3/8" and 1/4" NPT inlet only
  • The BPS models are "Short" BP Series Air Blow Guns

Model BPV

  • Side holes serve not only as aspirating holes to increase volume of air when gun is in  operation, but in compliance with OSHA regulations, provide relief holes when discharge is blocked
  • Pressure in barrel is 10 psi when this condition occurs
  • The drilling holes in the gun body eliminate need for further tips and gun is complete  as shown
  • Barrel of gun tapped 1/8" NPT so 1/8" pipe extension may be added

Blow Gun Tips

The following tips may be purchased to go with any of our Bang-Pruf® Air Blow Guns to  allow you to customize the gun to your application

BPS and BPRS 

Model XM -- 1/8" male IPT and 1/8" orifice steel tip with relief holes provides relief if end is blocked.

BPV diagram 

Model XMR -- 1/8" male IPS steel tip with 1/8" orifice; gun must be used with pressure regulator to meet OSHA specs.

 

Give us a call or drop us a quick e-mail, and we'll  be glad to quote your order!


2923 Oak Trail, Edgewater, FL 32141
Toll-Free Phone: 877-TRY-HATZCO
(877-879-4289)
Local: 386-402-4178 * Fax: 866-870-0806 * E-Mail: info@hatzco.com

| Main | About Hatzco | Blow / Spray Guns  | FlexShaft / Scribers | Contact Us |


Copyright © 2008 Hatzco Industries - All Rights Reserved